Wetelux 92 75 56 Manuel D'instructions page 11

Operation
1. Press the ON/OFF button (2) once. The LEDs turn on and show
the battery capacity.
2. Immediately (within 6 seconds) press the ON/OFF button again in
order to turn on the light.
The following light modes are available when pressing the
ON/OFF button several times:
Press 1x
Press 2x
Press 2x
Press 4x
Press 5x
Press 6x
Using – Bracket
1. Fold the bracket in the desired position in order to hang up the
worklight on a suitable place. So you will always have both hands
free when working.
2. Fold the bracket either forwards or backwards, according to appli-
cation, in order to use it as a stand.
Cleaning and Storing
 Clean the housing of the LED worklight only with a dry or lightly
moistened cloth. Do not use aggressive chemicals or abrasives for
cleaning.
 Do not immerse the LED worklight in liquids of any kind. The work-
light is water jet proof (IP 65). Make sure the rubber cap is properly
attached in order to avoid moisture in the contacts.
 Store the LED worklight indoors in a dry place that is protected
from dust, dirt and extreme temperatures.
 Store the device out of reach of children.
All manuals and user guides at all-guides.com
Operation
Checking the battery capacity
100 % light intensity
50 % light intensity
SOS light
Flashlight
OFF.
11