Télécharger Imprimer la page

Ellrona 61490 Mode D'emploi Original page 32

Publicité

Les langues disponibles

Les langues disponibles

Attention
► The hob can be hot after use. There is a danger of burning! Wait until the appliance has
cooled down. Unplug the appliance before removing the temperature controller out of
the party pan.
► Caution: Allow the temperature controller to cool down before removing it. After the use
of the hot plate it can be very hot.
► Clean the hob after use as soon as it has cooled down. Extended waiting unnecessarily
complicates cleaning and can make it impossible in extreme cases. Excessive
accumulations of dirt can even damage the device under certain circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not immerse the appliance in water or other liquids, and do not put it in the
dishwasher.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Do not use a sharp metal pusher
► Do not cut the food with a knife on the surface.
► Do not put the automatic temperature controller on the hot plate. It must not come into
contact with the hot plate.
► No cleansing agents (except liquid soap), nylon brushes or metallic brushes must be
used as the surface of the hot plate could be damaged.
► Always clean the plate after having used it with a damp cloth as food leftovers or oil
sticked to the surface could adhere or bind.
15.2 Cleaning
After the use the Profi Party Pan has to be cleaned as follows:
name
Remove residues from cooking,
Hot plate
after the preparation by using a
soft cloth or a tissue while the hot
plate is still warm.
After cooling down cover the
holder to avoid that water enters.
After that clean the hot plate with
Excessive dirt
a soft cloth and a little dish liquid.
ellrona Profi Partypfanne
All manuals and user guides at all-guides.com
method
note
Do not use any cleansing agents
(except liquid soap), nylon brushes or
metallic brushes. The hot plate can
be damaged.
Do not submerge the hot plate in
water or do not wash it with water
while the plate is still hot (risk of
accident and risk of injury)
32

Publicité

loading