Recharging Porto Q 5K
Plug the included USB-A to USB-C cable into Porto Q 5K's USB-C port
(input only), and then into a USB-A charging port such as a wall charger
or car charger. For faster recharging, use a high-output USB-A charging
port of 12 W or higher.
USB-C
USB-A
LED behavior:
25%
50%
75%
100%
On the go (portable mode)
Breathing LED
Charging
Steady on
N/A
O
Not charging
(or device fully charged)
Flashing LED
Foreign Object Detection error
Troubleshooting:
1. Flashing LED (FOD)
Remove any metal objects like coins or keys in between your device and Port
Q 5K. If a problem still exists, please contact support@moshi.com.
2. Placement: center your phone when charging wirelessly.
All manuals and user guides at all-guides.com
Wall charger
Car charger
Smart LED
At home (charging pad)
Charging
Device fully charged
Not charging
Foreign Object Detection error
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modi cations not expressly
approved by the party responsible for compliance could void the user's authority to
operate this equipment. (Example - use only shielded interface cables when connecting
to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Important Notes & Instructions
• Porto Q 5K uses lithium-polymer cells and has no "memory e ect". You may charge
as frequently as you wish.
• Do not open, disassemble, puncture or modify your Porto Q 5K in any way. Doing so
not only voids the product warranty, but could also result in re, electrical shock,
serious injury and/or property damage.
• To prevent a short circuit or other potential hazard, keep any foreign metal object
away from Porto Q 5K's ports and connectors.
• It is normal that Porto Q 5K may be warm to the touch during usage. However, if the
product becomes hot to the touch, starts to expand or swell, or emits strong odor,
discontinue use immediately and contact Moshi to have the product examined.
• Keep Porto Q 5K away from heat sources such as thermal vents, re, and strong direct
sunlight. To prolong the life of Porto Q 5K's power cells, do not store Porto Q 5K at
elevated temperatures (over 80°F or 27°C).
• Charge cycle e ciency may vary depending on device model and other factors such
as ambient temperature.
• Use only certi ed cables to charge your smartphone and tablets. Non-compliant
cables may not perform as expected.
• Do not dispose your Porto Q 5K as household waste. For more information on how to
recycle this product, please contact your city government or local recycling center.