GE 25833 Mode D'emploi page 33

3. Press MEMORY button again to confirm.You will hear a confirmation tone.
-OR-
1. Press the REDIAL button on the handset.
2. Use the CALLER ID-VOL (or) to select the desired redial number.
3. Repeat steps 1 through 5 in Storing a Name and Number in Memory.
4. Press MEMORY button to save.
NOTE: If the memory location is occupied, "REPLACE MEMO?" is displayed, and
you must confirm replacement by pressing the MEMORY button.
NOTE: If the redial number is longer than 20 digits, the redial number cannot be
stored in memory.
Inserting a Pause in the Dialing Sequence (of a Stored
Number)
Press the #PAUSE/RINGER button on the handset's touch-tone pad to insert a delay in
dialing sequence of a stored number when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each
pause counts as one digit in the dialing sequence.
You can press the #PAUSE/RINGER button to insert a P (pause) when you enter the
telephone number during memory storing.
Reviewing Records Stored in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50.
3. Press the CALLER ID-VOL ( or ) buttons to scroll the records, or use the handset's
touch-tone pad to enter the memory location number (01-50).
Changing Records Stored in Memory
Follow items 1 to 7 for Storing Names and Numbers in Memory.
Deleting Records Stored in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50.
3. Press the CALLER ID-VOL ( or ) buttons to scroll to the record you want to delete or
use the touch-tone pad to enter the desired memory location (01-50).
4. Press the DELETE button to mark the record for deletion.The display
shows DELETE?
All manuals and user guides at all-guides.com
33