GE 25833 Mode D'emploi page 11

Allow handset to charge for 16 hours prior to first use. If you don't properly charge the
handset, battery performance is compromised.
CAUTION: Use only the ATLINKS USA, Inc. power adaptor 5-2605 that came
with this unit. Using other power adaptors may damage the unit.
Connecting the Telephone Line
On the base, plug the one end of the telephone line cord into the jack on the back of the
base and the other end into a modular wall phone jack.
Wall Mounting the Base
NOTE: For best results, leave the phone on a flat surface during initial charging
before you hang the phone on the wall.
1. Turn the base over.
2. Attach the wall mounting pedestal by first inserting the tabs on the open edge of the
pedestal into the slots on the lower portion of the bottom of the base.Then push down
and snap the pedestal into place.
3. Slip the mounting holes (on the back of the pedestal) over the wall plate posts and
slide the unit down into place. (Wall plate not included.)
NOTE: If desired, gather the extra telephone line and power adaptor cord and
store inside the wall mounting pedestal.
All manuals and user guides at all-guides.com
11