HyperX Pulsefire Core Mode D'emploi page 6

Function keys
DPI up/down button
DPI button + B5 button
DPI button + B4 button
Factory reset
DPI button + mouse wheel click
for 5 seconds
HyperX NGenuity software:
To customise the lighting and macro settings, download the HyperX NGenuity software here:
hyperxgaming.com/en/ngenuity
Refer to the HyperX NGenuity gaming software manual for more information on the functions.
Document No. 480HX-MC004B.A01
All manuals and user guides at all-guides.com
Secondary feature
Change between DPI presets. Default values are:
- 800 DPI (red then fade away).
- 1600 DPI (green then fade away).
- 2400 DPI (blue then fade away).
- 3200 DPI (yellow then fade away).
Decrease LED brightness. There are 4 brightness levels: off, low,
medium and high.
Increase LED brightness. There are 4 brightness levels: off, low,
medium and high.
Factory reset of the mouse and all on-board memory settings.
HyperX Pulsefire Core
TM
Mouse Page 5 of 5