Télécharger Imprimer la page

W&W 13-596 Mode D'emploi page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

HOW TO USE
Regulator by Cycle Electric;
for 65A Type generators
Item-№
13-596, 13-597
1. Mount regulator (preferably up front for cooling
reasons). Case must have good electrical connec-
tion to ground (motorcycle frame). You're advised
to check ground with an ohmmeter. Reading must
be zero or just above.
2. Route wires and cut to length. Connect wires:
Brown to „A" terminal on generator
Green to „F" terminal on generator
Red to battery or lights
Use solderless crimp terminals to ensure good
connections. Use proper crimp tool.
3. Polarize generator with regulator properly ins-
talled. Use a jumper lead from the battery positive
terminal to the generator „A" terminal for 2- 3 se-
© W&W Cycles AG, 2023-10-11, ID 271018, rev. 0.6, wwag.com
conds. Battery negative terminal must be connec-
ted to ground.
NOTE: bad ground and badly crimped connectors
may damage regulator. These conditions will void
warranty.
DE
EN
ES
FR
IT
Page 1 of 1

Publicité

loading

Ce manuel est également adapté pour:

13-597