Publicité
Les langues disponibles
Les langues disponibles
3 Rinse the hair chamber and shaving head holder
4 Turn the retaining ring anticlockwise and lift it off the
1
2
5 Remove the shaving heads from the shaving head
6 Clean the cutter and guard under the tap.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head holder.
10 Place the retaining ring on the shaving head.
under the tap.
shaving head.
Repeat this process for the other retaining rings. Place
them aside in a safe place.
holder. Each shaving head consists of a cutter and
guard.
Note: Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
21
English
Publicité
