CR 5016 – CR 5021
• Always unplugged the heater after use.
• Important! Do not insert any foreign objects into the
appliance openings! Risk of injury (electric shock) and
damage to the appliance!
• Keep the mains cord at a safe distance from the air inlet
and outlet grilles.
These instructions for use belong to the appliance and
must be kept in a safe place. When changing owners, these
instructions must be surrendered to the new owner!
SAFE POSITIONING
1. The heater must not be located immediately below a socket outlet
2. For your own safety and that of others: water and electricity are a dangerous combination! Do not use
this heater in the immediate surroundings of a bath, a shower or a swimming pool. Ensure that the
appliance cannot fall into water (bath wash basin, shower cubicle, etc.)
3. Please read also the safety information's before using.
4. Do not use the heater on extremely deep-pile carpets!
5. Do not use the heater in an upright position.
GENERAL DESCRIPTION
A. Air inlet grille
B. Air outlet grille
C. Selector switch
D. Thermostat knob
E. Control lamp
F. Oscillation
INSTRUCTIONS FOR USE
The selector switch and the thermostat knob enable you to select the following functions:
Selector switch:
Ο : OFF. Both the fan and the two heating elements are switched off
: "Cool air". Only the fan is switched on
I : "Warm air for gradual heating-up. ECO position (750 W): the fan andone of the heating leements are
switched on.
II : "Hot air" for quick heating-up. Full power (1500 W): the fan and the two heating elements are switched
on.
12