VOLTCRAFT WBP-90 Mode D'emploi page 40

c) Set the emissivity value
For accurate temperature readings, it is important to
select an emissivity value to match the emissivity of
the surface being measured.
See section 11. e) "Settings", "Emissivity" for how to
change emissivity values.
See section 13. "Emissivity" for a list of values for
common objects.
d) Capture screen image
Press the photo button (11) to capture the image
and data shown on the display (1).
• Press the right ►button (5) to save the image.
• Press the left ◄ button (3) to discard the image
It is recommended not to store more than
5000 images as this may affect the image
storage speed.
40
10. Navigating menus
Button Action
• Press to enter menu and submenus.
OK
• Press to confirm a selection.
◄ Press to move left.
► Press to move right.
Back (11)
Press to return to the previous menu.
Saved
Settings
images