Publicité
Les langues disponibles
Les langues disponibles
7. Select
wash
temperature
TEMPERATURE
all cold rinses
9. Press START/Pause/Unlock
to begin wash cycle
START
Pause/Unlock
Hold
3 sec to
cancel
Once you select a cycle, select the desire wash Temperature
by turning the Temperature knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
::iSome cold water is added to save
Whites and pastels
: energy. This will be cooler than
ii Durable garments
Wa rm
Some c old water wi,beadded, so
this will be cooler than what your
previous washer provided.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Press the START/Pause/Unlock
button to start the wash
cycle. Filling is delayed for several minutes while load
balance is sensed. When the cycle has finished, the DONE
indicator will light. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking
the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock;
the lid will unlock once the
washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close lid
and press START/Pause/Unlock
again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
Delay
in water
fill
Filling is delayed for 2 to 3 minutes to check for load
unbalance. You will hear the hum of the spin prior to filling.
This is normal operation.
8. Select
cycle options,
if desired
EXTRA RINSE
(_ EcoBOOST
If you would like to add an Extra Rinse and/or use the
EcoBOOST
TM
option, turn the knob for that feature to ON.
The EcoBOOST
TM
option allows you to increase your energy
savings on your wash cycles. When this option is used,
the wash cycle will use slightly cooler wash water than the
selected temperature.
Publicité
