Whirlpool WTW4950XW3 Guide D'utilisation Et D'entretien page 8

Load garments inloose heaps e venly
around t hewashplate. Donotload
garments directly o ver t hecenter
ofthewashplate; when loaded, the
center ofthewashplate should b e
visible. Try mixing d ifferent sized
garments toreduce t angling.
IMPORTANT: Garments need tomove freely f orbest c leaning
and toreduce w rinkling andtangling.
to dispenser, if desired
Do not overfill, dilute, or use more than 1 cup (250 mL). Do
not use color-safe bleach or Oxi products in the same cycle
with liquid chlorine bleach.
This washer has been designed to allow
FABRIC SOFTENER
the use of the Downy Ball® to dispense ADDED
fabric softener in the rinse cycle. Pour a
measured amount of Downy ® liquid fabric softener into the
Downy Ball ®, pull the ring tightly to seal it, and place on top
of load. Always follow manufacturer's directions for correct
amount of fabric softener based on your load size. Then
select Fabric Softener Added-Yes option. The Downy Ball®
will automatically release the fabric softener during the
rinse cycle. For questions on using the Downy Ball® call
1-800-688-7638 or visit www.downy.com.
IMPORTANT: Fabric Softener Added option must be selected
to "Yes" to ensure proper distribution at correct time in cycle.
Do not overfill or dilute.
Adding Liquid Fabric Softener Manually to Wash Load
During the final rinse, wait until the washer has completed
filling, press the START/Pause/Unlock button to pause the
washer. Lift the lid and add the measured recommended
amount of liquid fabric softener. Do not allow liquid fabric
softener to spill, splash, drip, or run into the basket or on load.
Do not use more than the recommended amount. Close the lid
and press the START/Pause/Unlock button again to start the
washer.
IMPORTANT: Fabric Softener Added option must be selected
to "Yes" to ensure proper distribution of the fabric softener
during the rinse portion of the cycle.
6, Select cycle
SOAK
WASH
CLEAN WASHER
witha_f_h
Turn cycle knob to choose your wash cycle.
8