Télécharger Imprimer la page

Toro 20330 Manuel De L'opérateur page 12

Masquer les pouces Voir aussi pour 20330:

Publicité

Les langues disponibles

Les langues disponibles

Replacing the Air Filter
Service Interval: Every 25 hours
1. Use a screw driver to open the air filter cover
(Figure 15).
Figure 15
2. Replace the air filter (Figure 16).
Figure 16
3. Install the cover.
Changing the Engine Oil
Service Interval: After the first 5 hours
Yearly
Run the engine a few minutes before changing the oil
to warm it. Warm oil flows better and carries more
contaminants.
1. Refer to Preparing for Maintenance.
2. Remove the dipstick (Figure 17).
1. Dipstick
3. Tip the mower onto its side with the air filter up
to drain the used oil out through the oil fill tube
(Figure 18).
4. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 17). Do
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
5. Install the dipstick securely.
6. Dispose of the used oil properly at a local recycling
center.
12
Figure 17
Figure 18

Publicité

loading

Ce manuel est également adapté pour:

22in recycler20330c2033120331c2035020351