Valley Sportsman 009164625 Manuel D'instruction page 7

1.3 Installation and use of foot pedal
1. Plug the foot pedal into the Stuffer Motor (As shown below).
2. Plug motor into grounded outlet and press the power button to turn the motor on. The light
will illuminate.
3. Pressing the foot pedal can only control the Piston moving down. When the Piston moves
down to the bottom of the cylinder, the Piston will stop automatically and begin to raise.
Release the pressure on the foot pedal.
Note: If the down button has been manually pressed the foot pedal will not work. Press the stop
button. Now the foot pedal will control the down motion of the piston.
Motor parameters
VOLTAGE
SPEED ON FREE LOAD
CURRENT ON FREE LOAD
TORQUE ON RATED LOAD
INPUT POWER ON RATED LOAD
SPEED ON RATED LOAD
CURRENT ON RATED LOAD
Category Parameter
36W (MAX)
75±15％R.P.M
0.7（MAX）A
6.0N.m
44±15％W
69±15％R.P.M
≤ 1.25A