Valley Sportsman 009164625 Manuel D'instruction page 6

1.2 Motor Installation Guide
1. Remove the Socket Cover with screwdriver.
2. Insert the plug of the sensor into the socket on the side of the sausage stuffer gear box. Slide the Stuffer
Motor onto the Slow Drive Shaft lining up the Mounting Thumbscrews to the Thumb screw Mounting Holes.
Caution: The plug of the sensor must be plugged into the socket entirely. If plug is not securely inserted the
Piston will not be able to stop at the cylinder bottom or the highest position automatically.
This may cause the motor to overload or possibly damage the stuffer or motor. This type of damage IS NOT
covered under warranty.
3. Screw the Mounting Thumbscrews into the holes on the side of the stuffer. Be sure to snugly tighten these
three Mounting Thumbscrews to secure the Stuffer Motor onto the stuffer.