Valley Sportsman 009164625 Manuel D'instruction page 5

Installation guide
1. Place the Stuffer onto a stable table or workspace.
2. Attach the Handle to one of the Drive Shafts and turn to raise the Piston out of the Cylinder and into the
Piston's highest position.
3. Place the Cylinder into the Lower Cylinder Brackets and pivot the Cylinder back into the frame of the
machine. Push the Cylinder back into the Upper Cylinder Brackets to lock into place.
4. Remove the Retaining Ring from the Cylinder by turning it counter-clockwise.
5. Insert the S Tube of your choice through the Retaining Ring.
6. Turn the Retaining Ring and S Tube assembly clockwise onto the Cylinder, until the assembly is hand tight.
DO NOT OVERTIGHTEN.