GE 29111 Serie Mode D'emploi page 34

. Release the page button.
5. Press and release the page button on the base once.
All handsets are de-registered and HANDSET NEEDS
REGISTRATION shows in the display.
Default Setting
As you become familiar with this system, you may prefer to
use the system's original settings. Follow the steps below to
return to the factory default settings.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the
DEFAULT SETTING sub-menu.
. Press the program/mute button to enter the menu.
DEFAULT SETTING 1YES 2NO shows in the display. The
default setting is 2NO.
. Use the touch-tone pad to select 1YES or 2NO, or use the
caller ID-volume ( 6 or 5) button to move the cursor to
1YES or 2NO.
NOTE: If you choose YES all the settings in the
programmable menu are returned to factory
default setting.
. Press the program/mute button to save your selection. You
will hear a confirmation tone.

All manuals and user guides at all-guides.com