GE 29111 Serie Mode D'emploi page 31

. Press the program/mute button to enter the menu.
REGISTRATION 1YES42NO - - - shows in the display The
default setting is 2NO.
. Use the touch-tone pad to select 1 for YES or  for NO. Or
use the caller ID-volume ( 6 or 5) button to scroll to 1YES
or 2NO.
. If you select 1YES, press the program/mute button. HOLD
BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET
PROGRAM shows in the display. (Your handset should be
held near the base during registration process.)
5. Press and hold the page button on the base unit, the
charge/in use indicator flashes. Press the handset
program/mute button. REGISTERING shows in the display.
HANDSET X REGISTERED shows in the handset display,
where X is the handset number. You may now rename
your handset. (Refer to Step  &  of Handset Name
Section)
NOTE: IF you are re-registering the handset
through the handset menu; to rename your
handset you must go to the Handset Name
Section and start from the beginning step.
All manuals and user guides at all-guides.com
1