unpacking
•
Remove the shipping box.
•
Check that the appliance has not been damaged during transport. Do not plug in a
damaged appliance under any circumstances! If the appliance is damaged, please contact
your retailer.
•
Remove all adhesive tape and packaging materials on the inside and outside of the
appliance.
Before first use
•
Clean the inside of the appliance with a little white wine vinegar diluted in warm water.
Do not use soap or detergent as the odour may linger. After cleaning, dry the appliance
completely. Wipe electrical parts with a soft cloth only.
•
You can use white spirit to remove any remaining adhesive from the outside of the appliance.
•
To clean the appliance, always unplug it, or remove the fuses or turn off the circuit
breaker.
installation
Installation location
•
This refrigeration appliance is not intended to be used as a built-in appliance. Place your
refrigerator on a stable, level surface. Your appliance will be heavy when loaded with food:
it must therefore be placed on a solid, resistant floor. The appliance must be installed in
a dry, well-ventilated room at room temperature. Refer to the table in the next section
'Climate class'.
•
Never place an appliance that emits heat (microwaves, toasters, etc.) on top of the
refrigerator.)
•
The appliance must not be exposed to direct sunlight.
•
The appliance must not be exposed to rain.
•
The appliance must not be installed next to a radiator, a stove or any other heat source.
•
The appliance's energy consumption and efficient operation are affected by the room
temperature.
•
The appliance must be installed so that the power outlet is accessible. The appliance can
be installed on its own, next to a piece of furniture or in front of a wall. Make sure that there
is enough free space around the appliance so that the door and drawers can be opened
conveniently.
•
Make sure that it is not resting on its power cable after installation.
All manuals and user guides at all-guides.com
27
V.1.0
installation