Publicité
Les langues disponibles
Les langues disponibles
fi nish framing
6.0 fi nishing
EN
6.1
sleeve extension installation
1. Loosen screws and slide the extension out until its fl ush with the fi nish material.
2. Tighten screws.
Not extended
IMPORTANT:
* The minimum clearance from combustible material must be maintained top and sides
from the extension sleeve.
16
W415-3001 / A / 04.30.21
Fully extended
1/2" min.*
Sleeve
extension
Sleeve
Finishing
material
Type 1
1/2" min.*
Sleeve
extension
2"
Sleeve
Finishing
material
Publicité
