Tripp-Lite SmartOnline SUINT1500LCD1U Manuel D'utilisation page 14

2 Introduction
2.5.5 Flow Chart of the 7-Segment Display
The following flow chart illustrates how to go through each display screen. Use the UP button to rotate through the screens
clockwise and the DOWN button to rotate through the screens counter-clockwise. The example below shows Standby Mode.
(Each of the display diagrams shown below is for reference only. Actual display depends on the operation of the UPS.)
Note: the screen for Error Code will not be displayed if there are no errors to report.
UPS and Site Power Status Screens:
Input Voltage
Input Frequency
Output Voltage
Output Frequency
Load Percentage
14
Error Code
Battery Voltage
Battery Percentage
Load KW
Load KVA