Omnitronic PM-322 Mode D'emploi page 16

Occupation balanced stereo1/4" jack plug:
• You can connect up to 2 record players using the PHONO 1 sockets and PHONO 2 on the rearpanel. You
can only control the record player signal after you switched the PHONO/LINE switches to PHONO. The
signal is then controlled via the CH-1 and CH-2 faders.
• Connect your CD player, DAT recorder, cassette deck, tuner, tape recorder or all other line signals to the
LINE input sockets on the rearpanel. You can only control the line signals after you switched the
PHONO/LINE switches to line. The signal is then controlled via the respective faders.
• Connect the connection cable of the power unit with the AC IN socket. Plug the power unit into your outlet.
16/37 00039561.DOC, Version 1.2