Costway SP37498 Manuel De L'utilisateur page 2

EN
Components:
1.Plastic connection---6pcs 2.Thumb bolt---12pcs
3.Washer---24pcs 4.Lock nut---12pcs
5.Post---2pcs 6.Cross bar---2pcs
7.Base Tube---2pcs 8.Rubber bottom cap---4pcs
Installation Steps:
1.Check all the components.
2.Install the base tube with plastic connections.
3.Connect all rubber bottom caps in place to the base tube.
4.Connect the post to the base tube with plastic connections.
5.Connect cross bars with plastic connections.
6.Deadlock all bolts and finish the installation.
7.Make sure you dead lock the height before using it.
02
Warning
●Please keep this barre away from humid environment to prolong the life
time.
●Know your limitations as well as the limitations of your equipment. Consult
a qualified instructor before attempting any new activity or skill.
●Do not attempt to repair damaged or worn equipment or components
yourself. Contact the customer service to arrange for proper repair or
replacement by a qualified technician.
●Test unit for stability prior to each use. Do not use it if you have any
concerns about the stability, condition or suitability of this equipment.
●Inspect each component for damage, loose fittings or signs of wear before
each use. Do not use if you have any concerns as to the condition of this
equipment.
●Use this equipment only for its intended purpose. Do not modify equipment
in any way.
●Before each subsequent use, re-check stability and settings of this
equipment.
●Remember that no equipment can eliminate the possibility of
injuries.
●This equipment is to be used only by properly trained, qualified persons
under supervised conditions. Use without proper supervision is dangerous
and should never be undertaken nor permitted.
03