Télécharger Imprimer la page

Costway ES10269 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

INSTRUCTIONS FOR SAFE OPERATION
1.Fan should be used only at rated voltage. This fan is designed for a
AC 220-240 V 50 Hz electric supply.
2.Never insert fingers or any other object through the fan guard when
fan is running.
3.Unplug when not in use, or when moving fan from one location to
another, and before putting on or taking off parts and before cleaning.
4.Do not put your fingers through the openings. Do not let children put
any objects into the front case.
5.Do not use this fan outside or in a damp area such as bathroom.
6.Do not place the electrical cord under a cover. Do not overlay the
cord with little covers or such element. Place the cord in an area
where there is no risk to stumble.
7.The fan must always be unplugged when not operating. To unplug
the heater, all the switches must be on the position "OFF", and then
the plug could be disconnected.
8.Do not operate the fan in an area where gasoline is used or stocked,
painting or such flammable liquids.
9.If you need to move the fan, switch off and unplug it.
10.If you need maintenance, please send the fan back to the agent.
11.No part of this fan must be replaced by the user.
12.The fan should not be opened up by the user.
13.Be sure not to allow water or other liquid to enter the inside of
motor.
14. The fan must be placed on a flat surface.
15. Need to check the power cord and plug is damaged regularly. If it's
damaged, must replace the power cord or plug by qualified expert
agency to avoid hazards.
16. The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a
person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
04
RATING INSTRUCTIONS
1.Be sure the voltage of fan conforms with local power conditions
before use.
2.Adjust the speed by pressing the switch:
0-Stop 1-Low 2-Medium 3-High
3.Adjust the tilt angle by moving the fan guard.
WARNING: This appliance must be earthed.
Cleaning and care instructions:
a.Always unplug the fan before cleaning.
b.Do not allow water to drip on or enter the fan housing.
c.Be sure to use a soft cloth moistened with mild soap solution.
d.Do not use any of the following as cleaner, petrol, thinner, benzene.
e.Always clean with dry cloth. Ensure that the fan is switched off from
the mains supply before removing the guard.
Specifications:
110-120 V ~ 60 Hz 160 W
05

Publicité

loading