Télécharger Imprimer la page

Kenmore ELITE 10659969802 Guide D'utilisation Et D'entretien page 11

Publicité

Les langues disponibles

Les langues disponibles

Adjusting the Controls
To adjust the set points, press and hold the TEMP button for
3 seconds. When adjust mode is activated, set points and
adjusting information
will appear on the display screen.
RECOMMENDED (O'F)
FREEZER
REFRIGERATOR(37F)
RECOMMENDED_
,-,OF
3",°F
U
-
NOTE: To view Celsius temperatures,
press the UNITS button
when adjust mode is activated. To return the display setting to
Fahrenheit, press UNITS again.
Refrigerator
Controls
When adjust mode is activated, the fourth and fifth buttons (from
the left) adjust the refrigerator compartment
temperature. The set
point range for the refrigerator is 33°F to 45°F (0°C to 7°C).
Press the fourth button (down arrow) to lower the set point.
Press the fifth button (up arrow) to raise the set point.
Freezer Controls
When adjust mode is activated, the second and third buttons
(from the left) adjust the freezer compartment
temperature.
The
set point range for the freezer is -5°F to 5°F (-21°C to -15°C).
Press the second button (down arrow) to lower the set point.
Press the third button (up arrow) to raise the set point.
CONDITION:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm
REFRIGERATOR Setting
1° lower
FREEZER too cold
FREEZER Setting
1° higher
FREEZER too warm/too
little ice
FREEZER Setting
1° lower
Press RETURN to exit adjust mode, or allow about 15 seconds of
inactivity and adjust mode will turn off automatically.
Additional
Features
Accelerated
Ice Production
The Accelerated
Ice feature assists with temporary periods of
heavy ice usage by increasing ice production
over a 24-hour
period.
Press the ACCELER ICE button to turn on the feature. The
display screen indicates whether the feature is on or off.
ON
OFF
The Accelerated
Ice setting will remain on for 24 hours unless
manually turned off. The display will continue to show your
normal temperature set point.
NOTE: If increased ice production
is desired at all times, change
the freezer control to a lower setting. Setting the freezer to a
colder temperature
may make some foods, such as ice cream,
harder.
SmartSense
TM
Temperature
Management
The SmartSense
TM
feature assists with regulating the
temperature inside the refrigerator and freezer. If a large quantity
of warm food is placed in the refrigerator or warm air enters the
refrigerator while the door is held open, SmartSense
TM
activates
to quickly restore the temperature
to the set point.
smartsense
NOTE: SmartSense
TM
is always on when your refrigerator is
operating. You do not need to press any buttons to activate it.
The SmartSense
TM
icon on the dispenser display screen
indicates that the feature is functioning properly.
Temperature
Display Always On
This feature keeps the temperature
display on at all times.
Press and hold TEMP and LOCK at the same time for
3 seconds to turn the feature on.
IMPORTANT: To avoid unintentionally
locking the dispenser
or changing other settings, be sure to press both buttons at
exactly the same time.
Press and hold TEMP and LOCK at the same time for
3 seconds again to turn the feature off.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the
refrigerator or freezer door is open for 5 minutes and the product
cooling is turned on. The alarm will repeat every 2 minutes. Close
both doors to turn it off. The feature then resets and will
reactivate when either door is left open again for 5 minutes.
Disabling Sounds
To turn off all dispenser and control sounds, including the
Door Ajar Alarm, press and hold ICE and TEMP at the same
time for 3 seconds.
IMPORTANT: To avoid unintentionally
changing other
settings, be sure to press both buttons at exactly the same
time.
To turn all sounds back on, press and hold ICE and TEMP at
the same time for 3 seconds again.
11

Publicité

loading

Ce manuel est également adapté pour:

Elite 10659976802Elite 10659963805Elite 10659972802