Publicité
Les langues disponibles
Les langues disponibles
About Oven Functions
Before sliding the range into the cabinet
Gas line
INSTALL_DOP48C96DLS_DA_DG68-01511A-00_EN+MES+CFR.indb 25
INSTALL_DOP48C96DLS_DA_DG68-01511A-00_EN+MES+CFR.indb 25
Regulator connection
1.
Turn off the gas-supply valve, and turn off power to
the range.
2.
Connect a flexible gas line to the shut-off valve
installed on the stub out. The line must be long
enough that the range can be pulled out for service
without disconnecting the line.
3.
Slide the gas line up through the chassis' access holes
to the regulator. (Move the wires inside the access
holes to keep them from catching on the gas line.)
4.
Connect the gas line to the regulator.
Turn off all cooktop controls, then turn on the gas
5.
supply.
6.
With a soap-and-water solution, check all lines and
connections for leaks.
7.
Turn off the gas-supply valve.
English 25
2023-02-23 오전 9:45:28
2023-02-23 오전 9:45:28
Publicité
