Sauder worksense Hutch 427809 Instructions De Montage page 14

Step 9
å
Push two SAUDER TWIST-LOCK® FASTENERS (37F) into
the large holes in the SMALL UPRIGHT (G).
å
Slide the SMALL UPRIGHT MOLDING (J) onto the
notched edge of the SMALL UPRIGHT (G).
37F
Page 14
Do not tighten the TWIST-LOCK® FASTENERS in this step.
G
427809
Slide the MOLDING (J)
onto the notched edge.
Notched edge
J
www.sauder.com/commercial-office/service
2
The groove
is closer to
this edge.