Publicité
Les langues disponibles
Les langues disponibles
PARTS COUNTING CONTINUED
5. Press the ZERO/ENTER key
number matches the number of items used in the
sample. As more weight is added, the display shows
the number of pieces (
%
%
6. Press the
key
to display the unit weight (
k g
total weight (
) or the count (
7.
Press the FUNC key
NOTE: See uline.com for a parts counting
instructional video.
CHECK WEIGHING
Check weighing sounds an alarm when the weight on the
scale exceeds limits stored in the memory. High and low
limits can be set and can be used individually or together.
Setting the High Limit:
Limit
1.
Press the LIMIT key
high limit. left most number is flashing and the
icon is on.
2. To change the high limit, press the
Limit
keys to select which number to change.
LIMIT/>
3. Press the TARE/^key
number.
4. Press ZERO/ENTER key
5. If you need to reset the number to zero, press the
FUNC/C
key.
Func
Setting the Low Limit:
1. After pressing ZERO/ENTER key
LO
shows the low limit,
2. To change the low limit, press the
LIMIT/>
to select which number to change.
Limit
3. Press the TARE/^key
number.
4. Press ZERO/ENTER key
5. If you need to reset the number to zero, press the
FUNC/C key
.
Func
6. After pressing the ZERO/ENTER key
returns to weighing mode with the check-weighing
function turned on.
7.
When a weight is placed on the scale, arrows
indicate if the weight is over or under the limits and
a beeper sounds.
PAGE 4 OF 27
All manuals and user guides at all-guides.com
OPERATION CONTINUED
Zero
when the displayed
pcs
).
g/pcs
pcs
).
to return to weighing mode.
Func
. Display shows the current
%
%
/<
and the
to change the flashing
Tare
to set the number.
Zero
Zero
, display then
will be on (left side of display).
%
%
and the
/<
to change the flashing
Tare
Zero
to set the number.
Zero
, the scale
Both Limits Set:
• The display shows
the limits.
Low Limit Set, High Limit Set to Zero:
• Display shows
HI
Shows
when above the Low Limit.
),
High Limit Set, Low Limit Set to Zero:
• Display shows
limit. Above the high limit display shows
Both Limits Set, Low is Set Greater than High:
• The beeper will never sound and display shows
if the weight is less than the
HI
if the weight is greater than the
NOTE: The weight must be greater than 20
scale divisions for check weighing to operate.
To Disable Check Weighing:
HI
1.
Press the LIMIT key
2. Press the FUNC/C key
limits when the current limits are shown, then press
the ZERO/ENTER key
ACCUMULATED TOTAL
Scale can be set to accumulate automatically or
manually.
To set automatic or manual accumulation:
1.
Press FUNC
2. Press LIMIT/> key
AU ON
AU OFF
or
3. AU ON
means automatic accumulation is on.
4. AU OFF
means scale is set for manual
accumulation.
5. Press TARE/^ key
AU OFF
and
6. Press ZERO/ENTER key
7.
Press FUNC key
NOTE: Even when the scale is set to display
grams or ounces, the accumulate function
still keeps weight in kilograms or pounds.
OK
when the weight is within
OK
when weight is under the limit.
LO
when weight is less than the high
LO
limit. Display shows
LO
to display current limits.
Limit
Func
to enter zero into both
to store the zero values.
Zero
and ACC
keys simultaneously.
Func
Acc
Limit
to scroll through options until
is displayed.
to toggle between
Tare
.
to set your selection.
Zero
to exit.
Func
OK
.
LO
Limit.
AU ON
0417 IH-1649
Publicité
