Sanyo VCC-N6584 Manuel D'instructions page 9

❶ Iris setting (IRIS)
This sets the lens aperture.
Automatic iris (AI)
•
When setting the electronic iris,
set the lens aperture to maximum
(minimum F value).
•
If using an electronic iris (fi xed or
manual iris lens) under fl uorescent
light illumination, fl ickering may
occur in the images.
•
If the overall images become too
dark or too light when using an
automatic iris lens, use the lens iris
volume (LEVEL) to adjust.
❷ Day/night setting (D/N)
Automatic setting (ON)
Automatic setting:
When it become dark, images are automatically
switched from color images to black-and-white
(non-IR sensitive) images.
Black-and-white Black-and-white
Switching luminance
Color image fixed:
Images are always taken in color
❸ Backlight compensation (BLC)
This is only enabled when using an automatic iris
lens.
All manuals and user guides at all-guides.com
Electronic iris (EI)
(For indoor use)
Color image fixed (OFF)
Color Color
Multi-spot metering*
Applies backlight
compensation to the
whole image (MULTI).
High Normal
* If the background for the objects is extremely dark, set to
center-zone metering.
* If you would like compensation for the overall image to be
carried out quickly, select high.
❹ White balance (WB)
Automatic
(ATW)
When turned clockwise, the hue
becomes higher.
❺ Aperture compensation (AP)
Normal outline
(NORM AP)
❻ Lens iris level adjustment
(LEVEL)
Adjust if the overall images are too dark or too
bright when using an automatic iris lens.
(Darker)
8
Center-zone
metering
Applies backlight
OFF
compensation to
the center of the
image (CENT).
Manual (MANU)
(Red)
(Blue)
Sharper outline (HI)
(Brighter)