aldes L1-02 Manuel D'instructions page 9

Operation instructions
SUPER mode
SUPER mode is used to start or stop fast cooling or heating. I n SUPER mode, the super indicator will
display on LCD.
SUPER mode can be set when the appliance is in operation
In SUPER mode, you can set temperature, airflow direction or timer.
How to set SUPER mode?
Press button at the cooling, dry or fan only mode.
SUPER
At high fan speed ,the set temperature
Result :
automatically to 16℃
Press button at the heat mode.
SUPER
At auto fan speed ,the set temperature
Result :
automatically to 30℃
How to cancel SUPER mode?
Press SUPER , MODE, FAN, ON/OFF or SLEEP button
The display return to the original mode.
Result :
Escape from SUPER mode.
Note:
SMART button is not available in SUPER mode.
ECONOMY button is ineffective in SUPER mode.
The Appliance will continue working in SUPER mode, if you don't escape from it by pressing any of the buttons
mentioned above.
Heating is NOT available for cooling only air conditioner.
For the first generation of products, you can't set temperature in super mode, but you can press TEMPERATURE
SETTING button to escape from super mode.
Power control mode
When in Cooling mode, press
ECONOMY
5 seconds once again to stop it.
When the appliance
The operation modes changed in sequence:
Result :
PRESS
Power control mode is ineffective in SUPER or ECONOMY mode
Except for the button of Swing, Dimmer, Ifeel, Clock, Time on, Time off, Fan, press the other buttons can exit the
Powercontrol mode, and the indicator " % " will disappear.
When start the Power control mode, the fan will automatically enter low wind speed, but you can change the wind
speed by press the Fan button.
(61°F) .
(86°F) .
button for about 5 seconds once to start Power control mode ( at low fan speed ), press this button for about
in the Power control mode,
75%
ECONOMY
or energized .
TEMP.
SUPER
PRESS
TEMP.
TEMP.
SUPER
PRESS
TEMP.
.
press button once by once
ECONOMY
55% 35%
.
7
FAN SPEED
FAN SPEED
Cancel