Publicité
Les langues disponibles
Les langues disponibles
Remote controller
Remote controller
The remote controller transmits signals to the system.
SMART(invalid for
Used to enter fuzzy logic operation directly,
regardless of the unit is on or off.
POWER
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
SUPER
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
16℃ 61°F set temp automatically ; Fast
(
)
heating operates at auto fan speed with 30℃
86°F set temp automatically)
(
)
IFEEL
Used to set IFEEL mode operation. Press
it once, the IFEEL function will be started.
Press it again, the IFEEL function will be
shut off.
SWING(invalid for
some models)
Used to stop or start vertical adjustment
louver swinging and set the desired up/
down airflow direction.
CLOCK
Used to set the current time.
QUIET
(invalid for some models)
Used to set or cancel Quiet Mode operation.
When the air conditioner is in standby, and the
mode of
remote controller
is in Cooling or Dry
(except Super mode),
press this button for
about 5 seconds once to start Clean mode ,
then the indicator "
" will display on LCD.
Indication symbols on LCD:
Cooling indicator
Auto fan speed
Dry indicator
Higher fan speed
High fan speed
Fan only indicator
Medium fan speed
Heating indicator
8℃Heat indicator
Low fan speed
Lower fan speed
Note: Each mode and relevant function will be further specified in following pages.
some models
)
SMART
SUPER
FEEL
CLOCK
QUIET
+
TIMER ON
TIMER OFF
Used to start or stop LOCK mode.
+
8℃ HEAT(optional)
TEMP.
Used to start or stop
Sleep 1 indicator
Sleep 2 indicator
Sleep 3 indicator
Sleep 4 indicator
Lock indicator
ON
OFF
MODE
TEMP.
FAN SPEED
TEMP.
SLEEP
TIMER ON
TIMER OFF
DIMMER
ECONOMY
LOCK
8℃
mode.
HEAT
Quiet indicator
Smart indicator
Economy indicator
Super indicator
Ifeel
Clean indicator
1
5
TEMP + -
Used to adjust the room temperature and
the timer, also real time.
MODE
Press this button to select the operation mode.
FAN
Used to select fan speed in sequence auto,
higher,
high,
medium, low or lower.
SLEEP
Used to set or cancel Sleep Mode operation.
SWING(invalid for
some models)
Used to stop or start Horizontal adjustment
louver swinging and set the desired left/right
airflow direction.
TIMER ON
Used to set or cancel the timer operation.
TIMER OFF
Used to set or cancel the timer operation.
(invalid for
ECONOMY
some models)
Used to set or cancel Economy Mode
operation.
When in Cooling mode (except Super mode),
press this button for about 5 seconds once
to start Power control mode ,press this
button for about 5 seconds once again to
stop it
(invalid for
DIMMER
some models)
When you press this button, all the display
of indoor unit will be closed. Press any
button to resume display.
Signal transmit
Battery power indicator
Display set timer
ON
OFF
Display current time
Display temperature
Power control indicator
Publicité
