Pioneer BCS-HW919 Mode D'emploi page 48

48 Operating
Changing the TV Aspect Ratio
eroy
You can change the TV aspect ratio setting while
playback.
1. During playback, press DISPLAY (m) to display
the On-Screen display.
2. Use W/S to select the [TV Aspect Ratio]
option.
3. Use A/D to select desired option.
4. Press RETURN (x) to exit the On-Screen
display.
, ,
Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Setup] menu is
not changed.
4
Changing subtitle code page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press DISPLAY (m) to display
the playback menu.
2. Use W/S to select the [Code Page] option.
3. Use A/D to select desired code option.
4. Press RETURN (x) to exit the On-Screen
display.
Changing the Picture Mode
eroy
You can change the [Picture mode] option while
playback.
1. During playback, press DISPLAY (m) to display
the On-Screen display.
2. Use W/S to select the [Picture Mode] option.
3. Use A/D to select desired option.
4. Press RETURN (x) to exit the On-Screen
display.
Setting the [User] option
1. During playback, press DISPLAY (m) to display
the On-Screen display.
2. Use W/S to select the [Picture Mode] option.
3. Use A/D to select the [User setting] option,
and press ENTER (b).
4. Use W/S/A/D to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
5. Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.