Samsung SMT-190D Serie Mode D'emploi page 17

USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL
■ Remote Controller
All manuals and user guides at all-guides.com
Button
SCR. SAVE
0 ~ 9
ID RESET
SYSTEM ID
M.SCREEN
VOLUME (+/-)
PIP
ZOOM
FREEZE
MENU
DVR/LCD
LIVE/P.B
/TRIPLEX
SEARCH
▼, ▲, , 
ENTER
VGA PIP
MUTE
AUTO
SOURCE
UNDER SCAN
P.MODE
Eng-17
Function
Allows users to set the monitor's SCREEN SAVE MODE.
Channel KEY/Number Key.
The Remote ID is reset to 1.
SYSTEM ID setting. Press the SYSTEM ID KEY and the
number keys to input the SET's ID. (Refer to SYSTEM ID. (Eng-))
QUAD - A,QUAD - B, 9 split screens selection
Increase and Decrease sound volume from the monitor.
Picture In Picture.
X screen in Single Channel.
Allows users to see a target camera picture in the PAUSE MODE.
Displays menu items. Use this also to exit the sub menu and return to
the menu at the next highest level.
Selects DVR mode or LCD MONITOR mode.
LIVE/PB/TRIPLEX modes are converted in sequence
Search video/audio signals recorded in HDD.
▼, ▲, ,  directional keys.
key is used for Fast Forward during playback and Step Forward
during pause.
 key is used for Fast Reverse during playback and Step Reverse
during pause.
Use to select a menu item or to accept the changed value.
Plays back DVR recorded data. Temporarily stops during
playback.
Stops DVR playback or recording.
Records live video.
Lock STOP keys during recording to prevent accidental
operation of the unit.
PIP - Available in VGA Mode
Push the PIP button to turn PIP screen On/Off.
Press to mute the sound temporarily. Displayed on the
bottom left of the screen. Press the MUTE button again to cancel the
Mute function.Alternatively press the - or + button to cancel the Mute
function.
Available In VGA mode Only
Adjusts the screen display automatically.
Press the 'SOURCE' button to change the input signal source. Changing
the source is allowed only in external devices that are connected to the
monitor at the time. [DVR / VGA]
Displays the entire video signal on the screen.
Available in DVR Mode Only.
Press to select a pre-defined Picture Mode of the monitor or to change
the picture atmosphere as required. When you press this button, current
mode is displayed on the lower center of the screen. The monitor has
four automatic picture settings that are preset at the factory.
Then push button again to circle through available
reconfigured modes. ( Dynamic, Standard, Movie, Custom )