castorama Firenze 2 Serie Mode D'emploi page 27

Then set up the desired number of days (max-
imum 45) by means of the "+" and "-" keys.
The desired setting is autoconfirmed.
Now the LCD shows the
number of days, which decreases as the days
pass.
To deactivate the function at any time, press
the and "-" keys together.
4.3.6 KEYPAD LOCK
It is possible to lock the keypad to prevent accidental modi-
fications.
To activate the function, press the "Mode"
and "+" keys together and hold them both
down until the icon
To unlock the keypad, press the same two keys together as
before.
The "Keypad Lock" icon will no longer appear on the LCD.
IMPORTANT: The "Keypad Lock" function does not inhibit
the "Standby" key. This is therefore always active, even when
the "Keypad Lock" function is enabled.
4.4 BEHAVIOURAL INDICATOR
The behavioural indicator allows you to check if the chosen
temperature set point is aligned with the recommended
guidelines, in order to avoid the waste of energy and reduce
the energy consumption.
An arrow will appear by one of the three colored bars that
represent the energy consumption in a qualitative way,
according to the following scheme:
(a) Green: The chosen temperature set point
is already lower than the recommended.
c
b
(b) Yellow: The chosen temperature set point
a
is adequate, but it would be better to further
decrease it.
(c) Red: The chosen temperature set point is
high, it would be better to decrease it.
ATTENTION: The behavioural indicator gives an exclusively
qualitative indication of the energy consumption. It is NOT
an absolute measure.
icon and the set
4.5 INSTANTANEOUS POWER INDICATOR
This graphic provides an immediate indication of radiator
power use (each sector represents 20% of the power).
IMPORTANT: In case of power down due to a black-out, all
current settings are kept in memory with the exception of
date and time.
If the power black-out occurs in "Chrono" mode, when pow-
er is restored, the radiator resumes functioning in "Energy
Saving" mode.
IMPORTANT: If the appliance remains without power while
the "Overdrive (2h)" function is enabled, the date and time
settings are lost. When power is restored, the appliance
appears on the display. exits the function and resumes functioning in the mode se-
lected previously.
IMPORTANT: In case of power down while the "Holiday"
function is enabled, when restored, the function remains
active and the countdown of days to the end of the holiday
resumes from the moment of its stop.
IMPORTANT: In case of power down while the "ASC" func-
tion is enabled, when restored, the function remains active
but a few days will be required for it to become fully opera-
tional.
5. CLEANING
21
Before cleaning, make sure the appliance is turned
off, cold and disconnected from the household
mains.
To clean, just wipe with a soft damp cloth and
neutral detergent. Never use abrasive or corrosive
cleaning products or solvents.
To maintain efficiency, remove the dust from the
surface and inside of the appliance at least twice a
year using a vacuum cleaner.
GB