castorama Firenze 2 Serie Mode D'emploi page 25

If you fail to enter the setup in this way, key
the "Mode" key until the
the display.
Then press the "Mode" key again and hold
it down until the number indicating the day
flashes.
Adjust the day of the week by using the "+"
and "-" keys (1=MON, 2=TUE,...7=SUN), then
confirm by pressing the "Mode" selection
key.
Repeat the same procedure for the hours.
The minutes now start flashing. Use the "+" and
"-" keys to set the minutes then press the key to
confirm and exit or press the "Mode" key to enter
the P4 program setup.
SETTING THE P4 PROGRAM
To enter the P4 custom program setup, press the "MODE" key
when you finish setting the minutes (see SETTING THE CUR-
RENT DAY AND TIME).
Start with the first day. Choose by means of the "+" and "-"
keys, for each hour, between the "Comfort" temperature (two
lines) and the "Night/Eco" temperature (single line).
T Night/Eco T Comfort
Press the "Mode" key to confirm and repeat the same
procedure for each day of the week.
The weekly program is now set.
The icon of the ASC function (see Ch. 4.3.1) starts flashing.
Press the key to activate the function or the "-" key to
de-activate it.
4.2.6 ENERGY SAVING
This fixes the temperature at 17 °C. "Energy Saving" mode
reduces energy consumption when the room is left unused
but a comfortable temperature needs to be maintained.
To activate "Energy Saving", press the "Mode"
key until the "E S" symbol is displayed in place
of the hour/temperature.
4.3 FUNCTIONS
icon appears on
The appliance has a number of special functions to customise
and optimise use.
4.3.1 ASC
This function measures the thermal inertia of the room and
switches the radiator on in advance to ensure that the "Com-
fort" temperature is reached by the set time.
The function can switch the appliance on up to 2 hours early.
4.3.2 OPEN WINDOW
The "Open Window" function automatically detects the
opening of a window which is present in the proximity of
the radiator (for example during the housework) and it goes
in "Anti-Freeze" mode, in order to prevent a useless heating
T Night/Eco
and save energy. The function can also detect the closing of a
window and reset the previous operating condition.
When switching the appliance on, the function is already ac-
tive, ready to detect any open windows.
For the optimal operation of the function, it is recommended
to install the appliance near a window (Fig. 9).
19
This function can be activated and operates only in
"Chrono" mode. (See Ch. 4.2.5.)
A number of days of data acquisition are required
to optimise the accuracy of the ASC function.
To activate or deactivate the function, press
the key and hold it down until the
appears or disappears from the display.
When an open window is detected, the "Open
Window" icon flashes.
Now pressing the key cancels the "Open
Window" action until detection of the next
open window.
The icon stops flashing.
GB
icon