Vollrath KDC1418-4F-06 Instructions D'assemblage

Knock Down Bakery Case – Four Tray (Front Doors)
CAUTION
Sharp Edges and Corners
Handle all parts carefully to prevent personal injury or damage
to the parts. Although edges and corners have been deburred,
they should still be considered sharp.
PARTS LIST
A B
E
H
I
Item Description
A Phillips Head Screws
B Self-Locking Nuts
C Handles
D Post and Screws (Included with Front Door Panels)
E Side Panels
F Small Bent Top Panel
G Large Bent Bottom Panel with Rubber Feet
H Front Door Panels
I Trays
J Back Panel
C D
F
G
J
Qty
20
4
4
8
2
1
1
4
4
1
Please register your product at Vollrath.com/ProductRegister
Assembly Instructions
Item No. KDC1418-4F-06
ASSEMBLY
Tools You Will Need
• Medium-size flat head screwdriver.
• Medium-size Phillips head screwdriver.
• A clean cloth to cover the work surface to protect the bakery case.
NOTICE: Do not overtighten screws and hardware.
1. Remove the bakery display case and hardware from packaging.
2. Remove the protective masking from the display case.
3. Lay one side panel flat on a table, with rails facing up, and attach the
large bent bottom panel using three screws.
©
2017 The Vollrath Company L.L.C. Part No. 2350241-1 ml 3/28/17