Husqvarna LE 322R Manuel D'utilisation page 12

Battery LED indicator on page
occurred. Refer to
12 .
LED indicator
4 LED lights are on
3 LED lights are on
2 LED lights are on
1 LED light is on
1 LED light flashes
To install the battery charger on the wall
CAUTION:
screwdriver to install the battery
charger to the wall. An electric
screwdriver can cause damage to the
battery charger.
12
Battery status (state of charge)
BLi22
N/A
The battery is 76% - 100% charg-
ed.
The battery is 51% - 75% charged. The battery is 26% - 50% charged.
The battery is 26% - 50% charged. The battery is 6% - 25% charged.
The battery is 0% - 25% charged.
Do not use an electric
Battery LED indicator
The display shows the state of charge and if
there are problems with the battery.
BLi30
The battery is 76% - 100% charg-
ed.
The battery is 51% - 75% charged.
The battery is 0% - 5% charged.
1. Install the battery charger on the wall with
the 2 screws (A). Use wall plugs (B) if it is
necessary.
A
A
2. Install the 2 screw hole plugs (C).
3. Connect the power cord (D) to the battery
charger and a mains socket.
B
C
D
1840 - 005 - 11.07.2023