Settings; Input Setting (Vcr1/Vcr2) - Pioneer AVD-W1100V Mode D'emploi

Settings

Input Setting (VCR1/VCR2)

Video formats such as NTSC, PAL, and SECAM can be selected depending on the format
of the AV equipment connected to this unit.
1. Turn off the system.
Press and hold the SOURCE/POWER button.
2. Display a setup menu.
Press and hold the WIDE/MENU button for 2 seconds or longer. The [SETUP MENU]
screen is displayed. [VCR1] has already been selected.
S E T U P M E N U
VCR1
VCR2 VCR2
POWER . C POWER . C
3. Select between [VCR1] and [VCR2].
Press the WIDE/MENU button. Selected item turns to blue.
4. Select video format.
Press the VOL+ button. The video system switches.
Each press of the VOL+ button selects the item in the following order:
[AUTO] = [NTSC] = [PAL] = [SECAM] = Exit to [AUTO]
S E T U P M E N U
VCR1
VCR2 VCR2
POWER . C POWER . C
Note:
• Pressing the VOL– button selects the item in the reverse order of the VOL+ button.
5. Complete the setting.
Press and hold the WIDE/MENU button for 2 seconds or longer to close the menu and
complete the setting.
Note:
• If [AUTO] is selected, NTSC, PAL, and SECAM are automatically identified and displayed.
• Broadcast reception may be inferior when [AUTO] is selected.
• If you do nothing for about 30 seconds after displaying the setup menu, the menu screen will disap-
pear.
AUTO
AUTO AUTO
NORMAL NORMAL
PAL
AUTO AUTO
NORMAL NORMAL
18