Product Installation; Protective Cap - Fracarro HOME FIBRE OPT-TX 1510 Instructions D'emploi

The fi gure below gives the example of a distribution of four different satellites and Internet.
OPT-TX DT OPT-TX DT
3W 3W
1310nm
Internet
Fibre optic distribution through OPT-TX 15X0 and internet
ATTENTION: A direct optical connection cannot be made between the OPT-TX 15x0 and the
optical receiver. The connection can only be made using optical line attenuators in order to not
exceed the overall input power on the optical receiver.
Check the optical level of the signal on the fi bre using an optical light meter before connecting it
to the optical receiver. The transmitter OPT-TX 15x0 can be wall mounted using the brackets that
are incorporated in the product mechanics. The space is provided for connecting the power lead
and for correct ventilation of the product (see fi gure below).
Fibre with connector SC-APC
The OPT-TX 15X0 transmitter has an SC-APC optical connector.
If splitters and taps VOV and VOT series are used, use the SC-APC -> MINI links (PR ADAPT, code
287226) for the connection to the optical distribution.
OPT-TX DT OPT-TX DT
3W 3W
WDM
Distribution

3.1 Product installation

3.2 Fibre optic connection
Ferule
1550nm
OPT-RX-DT QUATTRO
1570nm
1530nm
1510nm
WDM
Fibre with MINI connector

protective cap

13