Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
ENG
GETTING STARTED
1. The unit requires 3 X 1.5V AA batteries. Open the battery compartment cover and
insert the batteries in the right polarity, then close the cover (Proposal using alkali
battery). There should be time display on the liquid crystal screen after the batteries
are inserted.
2. Insert one end of the line cord to the line jack of the base and the other end to
the telephone wall outlet.
3. Connect the handset and the unit with coiled line.
4. Setting the dialing mode to correct mode according to the directions from your
local telecom.
5. Apply for the caller ID from your local telecom offi ce.
RECEIVING A CALL
1. When a call comes, the telephone rings, and LCD displays the seq. number of the
call, the date, time, incoming number and the NEW icon.
2. If the same number is received again, and the previous call has not been reviewed,
the LCD displays REP icon. When the incoming memory is full, the latest incoming
number replaces the oldest number in the memory
NOTE: For the phone to display incoming number and other information, you must
have an active Caller ID subscription with your local telephone exchange company
From handset
1. Pick up the handset and talk to the other party.
2. When fi nished, return the handset to the base.
From handset
1. When using the handset, press SPEAKER key and return the handset to the base.
2. When fi nished, press SPEAKER key again.
From speakerphone
1. When the telephone rings, press SPEAKER key and talk to the caller. For the other
party to hear your voice clearly, speak into the speaker from a distance of 32 cm or
less.
2. When fi nished, press SPEAKER key again.
MAKING A CALL
From handset
1. Pick up the handset.
2. When you hear the dial tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. When fi nished, return the handset to the base.
From Speakerphone
1. Press SPEAKER key.
15
Publicité
