Hilti TE 4-A22 Mode D'emploi page 11

Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Technical data
5.1 Rotary hammer
Weight including battery B22⁄8.0
Single impact energy
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in wood (solid)
Drilling diameter range in wood (solid)
Drilling diameter range in metal (solid-head drill bit)
Drilling diameter range in metal (solid-head drill bit)
6 Operation
6.1 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
6.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the tool holder from the front and into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
6.1.2 Fitting the battery
1. Push the battery into the battery interface on the tool until it is heard to engage with a click.
2. Check that the battery is seated securely.
6.1.3 Removing the battery
1. Press the release buttons on the battery.
2. Pull the battery out toward the rear.
*2153716*
2
3
4
2153716
21.6 V
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ... 40 ℃)
14 ℉ ... 113 ℉
(−10 ℃ ... 45 ℃)
TE 4­A22
8.6 lb
(3.9 kg)
2 J
3/16 in ... 1 1/16 in
4 mm ... 28 mm
1/8 in ... 25/32 in
3 mm ... 20 mm
1/8 in ... 25/64 in
3 mm ... 10 mm
English 7