Publicité
STEP 16
10
(x40)
#A21110
Position the back panel as shown. Flush the bottom edge of the back panel with the bottom edge of
the bottom (G). Align squarely with outer edges. Assure that the unit is square. Distance from corner
to corner must be equal as shown. Nail straight into back edges as shown.
Assure that the unit is square.
Make sure edges are flush with
each other.
ameriwoodhome.com
All manuals and user guides at all-guides.com
With assistance, carefully turn the assembly over onto its' front
surface to attach the back panel.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
10
T
G
A
24
back panel notch
* raw surface is shaded
You
Tube
Publicité
