Sommaire des Matières pour Ameriwood HOME 5991196COM
Page 1
CCCCCCCCCCC BCCCC Date of Purchase: ____/____/_____ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Easy Tough Assembly Difficulty Meter WARNINC –Unit can tip over causing severe injury or death. –Anchor unit to stud in wall (if instructed to) –Do not allow children climb on unit –Put heavy items on lower shelves or drawers...
Page 2
Do NOT return this product! Contact our friendly customer service team first for help Assembly Tips HCCpfuC HiCCC PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it for less heavy lifting - Identify, sort and count the parts before attempting assembly - Compression dowels are tapped in with a hammer - Slides are labeled with a R (right) and L (left) for proper placement...
Page 3
BCfoCC You SCCCC Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Page 4
BoCCd IdCCt f cCt oC Not actual size TOP PANEL LEFT SIDE PANEL RIGHT SIDE PANEL BOTTOM PANEL PARTITION LEFT DRAWER SIDE FRONT DRAWER RIGHT DRAWER SIDE BACK DRAWER...
Page 5
BoCCd IdCCt f cCt oC Not actual size DRAWER BOTTOM SIDE RAIL FRONT & BACK RAIL SHELF BACK PANEL DOOR CENTER LEG FRONT SUPPORT...
Page 6
PCCC LiCC Actual Size TUD0001 TUD0002 TUD0004 Cam Bolt Cam Lock DOWEL 8 X 25 15-12 TUD0008 TUD0009 TUD0006 CBS 3.5 x 16 CBS 4 x 38 NAIL TUD0010 TUD0018 TUD0020 PH M4 X 18 SHELF HOLDER L-BRACKET...
Page 7
PCCC LiCC Not Actual Size x5 SET TUD0016 TUD0012 DRAWER SLIDE 12“ HANDLE x1 set x2 SET TUD0021 TUD0019 ANTI TIPPING KIT SLIDING ROLLER...
Page 8
Step 1 x1 SET TUD0021 TUD0001 Insert Cam Bolt and fully tighten it. Fix anti-tipping kit, do not fully tighten in this step * raw edges are shaded...
Page 9
Step 2 TUD0001 Insert Cam Bolt and fully tighten it. * raw edges are shaded...
Page 10
Step 3 Quick Assembly TUD0004 TUD0002 Proper orientation of CAM LOCK Please ensure direction of Cam lock * raw edges are shaded...
Page 11
Step 4 x2 SET TUD0010 TUD0012 TUD0008 TUD0019 Install sliding roller & handle. * raw edges are shaded...
Page 12
Step 5 Fix legs to side rail by tighten the Cam Lock x2 SET * raw edges are shaded...
Page 13
Step 6 Fix front rail & back rail by tighten the Cam Lock * raw edges are shaded...
Page 14
Step 7 Fix side rail by tighten the Cam Lock * raw edges are shaded...
Page 15
Step 8 TUD0009 Fix bottom panel by using screw. * raw edges are shaded...
Page 16
Step 9 TUD0009 Attach center leg. * raw edges are shaded...
Page 17
Step 10 TUD0008 TUD0020 Secure bottom panel installation by using screw & L-Bracket. * raw edges are shaded...
Page 18
Step 11 Quick Assembly Proper orientation of CAM LOCK TUD0018 TUD0002 TUD0004 Preparation of left side panel * raw edges are shaded...
Page 19
Step 12 x5 (CL) TUD0002 TUD0008 TUD0016 TUD0001 Preparation of partition panel LEFT FACE Screw Position * raw edges are shaded...
Page 20
Step 13 Quick Assembly Proper orientation of CAM LOCK TUD0018 TUD0004 Preparation of partition panel RIGHT FACE * raw edges are shaded...
Page 21
Step 14 x5 (CR) TUD0001 TUD0002 TUD0004 TUD0016 TUD0008 Quick Preparation of right side panel Assembly Proper orientation of CAM LOCK Screw Position * raw edges are shaded...
Page 22
Step 15 Attach front rail to the right side panel * raw edges are shaded...
Page 23
Step 16 Attach to the partition panel * raw edges are shaded...
Page 24
Step 17 TUD0009 Attach left & right side panel, and partition panel to bottom panel. Please fully tighten the screw. * raw edges are shaded...
Page 25
Step 18 Attach top panel. * raw edges are shaded...
Page 26
Step 19 IBPBRTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. TUD0006 Attached back panel as shown nailing straight into the raw edges. Ensure that the unit is square. Distance from corner to corner must be equal as shown. * raw edges are shaded...
Page 27
Step 20 TUD0001 Preparation of drawer front. * raw edges are shaded...
Page 28
Step 21 Quick Assembly Proper orientation of CAM LOCK TUD0002 Preparation of left drawer side & right drawer side * raw edges are shaded...
Page 29
Step 22 Attach drawer side to the drawer front x5 SET * raw edges are shaded...
Page 30
Step 23 Slip in drawer bottom inside the groove x5 SET * raw edges are shaded...
Page 31
Step 24 TUD0009 Attach drawer back and fully tighten it. x5 SET * raw edges are shaded...
Page 32
Step 25 TUD0012 TUD0010 Attach the handle and tighten it from inside x5 SET * raw edges are shaded...
Page 33
Step 26 x5 (DR & DL) TUD0016 TUD0008 Attach drawer slide DR & DL x5 SET Screw Position Screw Position * raw edges are shaded...
Page 34
For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
Page 35
Step 27 Top roller STEP 1: Insert bottom roller into bottom rail STEP 2: Push down top roller before pushing the door inside. STEP 3: Properly align with top rail, then push the button from inside. STEP 4: Door installation success when top roller fully inserted in rail.
Page 36
Step 28 Slide the door to the right. Insert the shelf. * raw edges are shaded...
Page 37
Step 29 Slide the door to the left. Insert the drawers. * raw edges are shaded...
Page 38
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 45 lbs. 20.4 kg 10 lbs. 4.5 kg Each drawers 25 lbs. 11.3 kg Each shelf Warning: Risk of serious injury to person - do not place a television on this furniture.
Page 39
RCgiCCCC youC pCoducC Co CCcCiCC CCC foCCowiCg:...
Page 40
Español BubiCCCC DCCCCCCCC Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere). No Permita que los niños monten el mueble.
Page 41
Español Página 8 Inserte el perno de la leva y apriételo completamente. Fije el kit anti-vuelco, no apriete completamente en este p Página 9 Inserte el perno de la leva y apriételo completamente. Página 10 Asegúrese de que la dirección del bloqueo de leva Página 11 Instale el rodillo deslizante y el mango Página 12...
Page 42
Español Página 24 Conecte el panel lateral izquierdo y derecho y el panel de partición al panel inferior. Apriete completamente el tornillo Página 25 Fije el panel superior Página 26 . IBPBRTANTE! EL PANEL TRASERB ES UNA PARTE ESTRUBTURAL DE ESTA UNIDAD Y DEBE INSTALARSE BBRREBTABENTE.
Page 43
Español Página 34 Para mampostería, hormigón u otros materiales de pared: Consulte con su ferretería local para anclajes apropiados para fijar firmemente el soporte de seguridad. IBPBRTANTE: ESTA UNIDAD DEBE SER ASEGURADA A LA PARED PARA AYUDAR. SIGA ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTI-TIPPING PROPORCIONADO CON ESTE PRODUCTO.
Page 44
Español Página 37 Deslice la puerta hacia la izquierda. Inserte los cajones. Página 38 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas ‐ no coloque un televisor sobre muebles. Este mueble no está...
Page 45
Français cCpoC CCCCC Ce livret d’instructions contient d’importantes informations de sécurité. S’il vous plaît lire et conserver pour référence ultérieure. Ne pas retourner ce produit! BISE EN CARDE Ce mobilier peut basculer et causer des blessures graves et / ou la mort. Ancrer les meubles à...
Page 46
Français pCgC 8 Insérez la came du boulon et serrer complètement. Réglez le kit anti-bout serrez pas complètement dans cette étape pCgC B Insérez la came du boulon et serrer complètement. pCgC B0 Assurez-vous que la direction de la serrure à came pCgC BB Installer un rouleau coulissant et une poignée pCgC B2...
Page 47
Français PCgC 2B Connectez le panneau latéral gauche et à droite et le panneau de séparation au panneau inférieur. Serrez complètement la vis PCgC 2B Fixez le panneau supérieur. PCgC 2B IBPBRTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE DE STRUBTURE ET BET APPAREIL DBIT ÊTRE INSTALLÉ BBRREBTEBENT.
Page 48
Français PCgC BB Maçonnerie, béton ou d’autres matériaux de paroi: Vérifiez auprès de votre magasin local de matériel pour les ancrages appropriés pour fixer fermement le sup- port de sécurité. IBPBRTANT: CET APPAREIL DOIT ÊTRE FIXÉ AU MUR POUR AIDER. CES INSTRUCTIONS POUR INSTALLER LE SUPPORT antibasculant DE SÉCURITÉ...
Page 49
Français PCgC BB Faites glisser la porte vers la gauche. Insérez les tiroirs. PCgC B8 MAXIMUM DE CHARGE Cet appareil est conçu pour supporter la charge maximale enregistrée. Le dépassement de ces limites peut provoquer l’instabilité, l’effondrement et / ou causer des blessures graves. AVERTISSEMENT: Risque de blessures aux personnes ‐...