3.
Secure the panel.
Push the panel upwards until the latching mech-
‒
anism engages.
4.
Fit the grease filters.
To avoid causing damage, do not bend the grease
filters.
5.
Insert the mains plug into the protective contact
socket.
Removing the appliance
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Wear protective gloves.
1.
Disconnect the appliance from the power supply.
2.
Loosen the exhaust pipe.
3.
Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
4.
Remove the panel.
5.
Loosen the screw connection with the fitted unit.
6.
In order to loosen the fixing, use a screwdriver as a
lever. To do this, guide the screwdriver through the
lateral slot.
7.
Slowly take the appliance down.
Installation instructions en
27