7 - CLEANING AND MAINTENANCE
Before performing any cleaning and/
or maintenance operation, disconnect
the plug from the power socket.
a. Clean the appliance body (6) and the front panel (1)
with a damp cloth and possibly with a mild detergent.
Do not use abrasive materials or products.
Do not immerse the appliance body (6) in water or in other liquids.
b. Clean the air suction grid (6a) and the outlet grid (9) with a brush. Optionally, blow compressed
air for a deeper cleaning.
c. The appliance automatically counts the functioning time. After 2000 hours of functioning
the"FILTER" led (5h) turns on to warn that it is necessary to clean or replace the filters (see
the following paragraphs).
After cleaning or replacing the filters, keep button
the hours counting. The"FILTER" led (5h) flashes and the appliance emits a "beep".
Do not use the appliance without the filters (2 and 3) or if these
latter are dirty or worn.
EN - 9
6a
OK
NO
9
(5i) pressed for four seconds to reset