Publicité
Les langues disponibles
Les langues disponibles
EN
Getting Started
1.
Remove the filter cover. Pull the filter
from the housing.
2.
Take the filter out of its plastic
packaging, then reinstall it into the
housing. Make sure the handle on the
filter is facing out.
3.
Replace the filter cover by lining up the
cover's feet with the matching slots on
the bottom of the housing.
8
All manuals and user guides at all-guides.com
[Figure 1.1]
[Figure 1.2]
[Figure 1.3]
Figure 1.1
Figure 1.2
Figure 1.3
4.
Push the cover securely closed.
[Figure 1.4]
5.
Remove the "ATTENTION" notice that
covers the display on top of the air purifier.
6.
Attach the power cord to the port
underneath the filter cover at the bottom
of the air purifier.
Note:
If you are not planning to use
the air purifier for a long period of
time, keep the filter clean by leaving
it inside its plastic packaging until it
is ready to be used.
Figure 1.4
Figure 1.5
[Figure 1.5]
Publicité
