Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
MaxLite RS Series
®
2.
Remove the silicone plug from the USB-C receptacle (see Fig. 1).
3.
Plug the c-Max™ node into the USB-C receptacle via the USB connection (see Fig. 2).
4.
Secure the c-Max™ node in place by fastening the included M3 button head screw with a Hex (Allen) key
Note: In motion sensor models, the USB-C receptacle if present would no longer be functional.
(not included). Once the screw is secured, cover it with the included silicone cap
Note: For samples including a hex screw, please use a M2 allen key or equivalent.
© Copyright 2022. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
RS Series
Figure 1
Figure 2
Page: 8
REV: 12/20/22
Publicité
