Digital Recording From External Cd Player - Philips CDR 765 Mode D'emploi

RECORDING
2 To start dubbing, press PLAY on the CD Player deck.
High-speed dubbing will start.
and remain lighted. The track number and the recording
time will be displayed.
• To check the (remaining) recording time, press Display
(this can be done during recording).
• Dubbing will stop automatically.
3 To manually stop recording, press STOP
will go out and dubbing will stop. The minimal
D D U U B B B B
track length must be four seconds, otherwise a pause
will be added to the track.
After dubbing, the display will show for several seconds.
The Total Time indications may differ slightly, but no audio
information is lost.
Note:
- Pause cannot be operated during
- Dubbing will be done one track at a time, meaning that
short pauses will be added between the tracks. If you
program all tracks in their original sequence and dub at
normal speed ( - - 1 1 ), pauses will not be added.
D D U U B B B B
Start dubbing at normal speed (copy a track or program)
Copying one track at a time (
D D U U B B B B
1 For recording, press DUBB repeatedly until:
DUBB-1 appears on the display and
After some time, will flash.
R R E E C C O O R R D D
TRACK
RECORD ERASE
CD SYNC
FINALIZE
SHUFFLE SCAN
DUBB 1
AUTO TRACK TOTAL REM TRACK TIME
2 2 To select a track for dubbing, briefly press ∞ or § on the
CD Player one or more times.
• If you want to copy a program, you must enter the program
first before selecting - - 1 1 (see Programming, page 2.0)
D D U U B B B B
• If you select a track using the digital key pad on the remote
control, dubbing will start automatically.
3 To start dubbing, press PLAY on the CD Player.
- - 1 1 will stop flashing and remain lighted and the
D D U U B B B B
selected track or program will be copied at normal
speed. The track number and the recording time used
will be shown on the display.
• To check the (remaining) recording time, press Display.
This can be done during recording.
Note: Copy prohibited tracks will be copied analogue.
14
will stop flashing
D D U U B B B B
.
D D U U B B B B
- - 1 1 ) is done at normal speed.
- - 1 1 flashes.
D D U U B B B B
OVER TRACK
DUAL
SRC
SHUFFLE
TOTAL REM TRACK TIME
4 To stop dubbing, press STOP.
- - 1 1 will go out and the dubbing will stop.
D D U U B B B B
The minimal track length must be four seconds,
otherwise a pause will be added to the track.
After dubbing, UPDATE will appear on the display for
several seconds. The Total Time indications may differ
slightly, but no audio information will be lost.
Note: Pause cannot be operated during
Digital recording from an external CD Player
C D - R
E C O R
D A B L
E / R E
W R I T
A B L E
TO TA L
RE M
PA US E
TIM E
DIG
CD
RE WR ITA RE PE AT
1
BL E
PA US E
RE PE AT
C O M
P A C T
DI SP LA D I S C
Y R E C O
R D E R
SO UR CE
C D R 7
RE C LE VE
L
DU AL
Preparing for digital recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press SOURCE repeatedly until (depending on the digital
connection used):
DIGITAL or OPTICAL appears on the
DIG DIG
display.
CD SYNC
FINALIZE
SHUFFLE SCAN
DUBB 1
AUTO TRACK TOTAL REM TRACK
PAUSE DIG ANALOG OPT PROG REPEAT 1
• If necessary, press DUAL to switch off the
will no longer appear on the display.
D D U U A A L L
3 Press AUTO/MANUAL to switch between automatic and
manual track numbering.
If AUTO is selected (the preferred method),
will appear on the display.
TRACK
RECORD ERASE
CD SYNC
FINALIZE
SHUFFLE SCAN
DUBB 1
AUTO TRACK TOTAL REM TRACK
• AUTO: The track increments are automatically copied from
the digital source material.
• MANUAL: Track numbers can be incremented manually by
pressing §. (minimum track length is 4
seconds).
(This can also be done in AUTO mode).
• Track numbers cannot be changed after recording.
- - 1 1 .
D D U U B B B B
RE CO RD DU BB
AU TO /M
FIN AL IZ
E AN UA L
ER AS E
1
6 5
DI SP LA
Y
PH ON ES
SRC
SHUFFLE
TIME TOTAL REM TRACK TIME
PAUSE PROG REPEAT 1
mode;
D D U U A A L L
A A U U T T O O T T R R A A C C K K
TRACK
OVER DUAL
SRC
SHUFFLE
TIME TOTAL REM TRACK TIME