Dantherm CDP 35 Instructions De Service page 19

General information
Introduction
This topic gives the general information about this service manual and about the unit.
Manual, part no. Part number of this service manual is 975675.
Target group The target group for this service manual are the technicians who install and maintain
the CDP 35/45/65 unit.
Copyright Copying of this service manual, or part of it, is forbidden without prior written permission
from Dantherm Air Handling.
Reservations Dantherm Air Handling reserves the right to make changes and improvements to the
product and the service manual at any time without prior notice or obligation.
EC-Declaration of Dantherm Air Handling A/S, Marienlystvej 65, DK-7800 Skive hereby declare that the
Conformity units mentioned below:
are in conformity with the following directives:
- and are manufactured in conformity with the following standards:
Skive, 16.08.2001
Recycling The unit is designed to last for many years. When the time comes for the unit to be re-
cycled, it should be recycled according to national rules and procedures to protect the
environment.
The CDT dehumidifiers contain R407C refrigerant and compressor oil. The compressor
must in connection with disposal be returned to authorities.
All manuals and user guides at all-guides.com
Dehumidifiers, type CDP 35/45/65:
98/37/EEC
73/23/EEC
89/336/EEC
EN 60335-2-40
EN 292
EN 50081-1-EMC
EN 50082-1 EMC
Directive on the safety of machines
Lov Voltage Directive
EMC Directive
Standard for electric dehumidifiers
Machine Safety
Generic Standard for Emission
Generic Standard for Immunity
19