Télécharger Imprimer la page

Samsung DW60M5060BB Mode D'emploi page 22

Masquer les pouces Voir aussi pour DW60M5060BB:

Publicité

Les langues disponibles

Les langues disponibles

2. If you are fi lling the container for the fi rst time, fi ll 2/3 of its volume with water (around 500ml).
3. Place the end of the funnel (supplied) into the hole and introduce about 2kg of salt. It is normal for a
small amount of water to come out of the salt container.
4. Carefully screw the cap back on.
5.
The salt container must be refilled when the salt warning light in the control panel comes on.
Though the salt container is filled enough, the indicator light may not black out before the salt
fully dissolve. If there is no salt warning light in the control panel (for some models), you can judge
when to load the salt into the softener by the cycles that the dishwasher had run (see the following
schema).
If there are spills of the salt, a soak program could be run to wipe them out.
Fill the rinse aid dispenser
Function of rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak
free drying.
CAUTION: Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser
with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light on the control panel, you can judge the amount of rinse-
aid by the color of the optical level indicator "D" located next to the cap. When the rinse-aid
container is full, the whole indicator will be dark. As the rinse aid diminishes, the size of the dark
dot decreases. You should never let the rinse aid get below 1/4 full.
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated
below.
Full
3/4 full
1/2 full
1/4 full : Should refill to eliminate spotting
Empty
Rinse aid dispenser
1. To open the dispenser, turn the cap to the "open" (left) arrow
and lift it out.
2. Pour the rinse aid into the dispenser, be careful not to overfi ll.
3. Replace the cap by inserting it aligned with "open" arrow
and turning it to the "closed" (right) arrow.
1
22_ Prior Using for the First Time
DW4000KM-00000A-00_EN (Basic)_160323.indd
in 2-6 days after the salt container is fi lled with salt.
2
19
D (Rinse-Aid indicator)
3

Publicité

loading